Herman Miller® Action Office® Parts

Wall Start

This assembly connects a panel to an architectural wall, column or panel of equal height at a 90° angle.
Part#A0210

Draw Rod

This draw rod connects Action Office Series 1 or 2 panels or Co/Struc C-series panels of equal heights in a straight line.
Part # A0215

Draw Rod Change of Height

This draw rod connects Action Office Series 1 or 2 panels or Co/Struc C-series panels of equal heights in a straight line.
Part # A0219

2-way 90° Connector

This connector joins 2 panels of equal or unequal heights at a 90° angle. It has an enameled or fabric surface.
Part #A0220

2-way 120° Connector

This connector joins 2 panels of equal or unequal heights at a 120° angle. It has an enameled or fabric surface.
Part #A0221

Spacer

This spacer joins 2 panels of equal or unequal heights in a straight line and compensates for dimensional gain in a panel run.
Part # A0260

3-way 90° Connector

This connector joins 3 panels of equal or unequal heights at a 90° angles. It has an enameled or fabric surface.
Part #A0230

3-way 120° Connector

This connector joins 3 panels of equal or unequal heights at a 120° angles. It has an enameled or fabric surface.
Part #A0231

4-way 90° Connector

This connector joins 4 panels of equal or unequal heights at 90° angles and has an enameled surface. It does not require a cable management side cover.
Part# A1240

Panel Hinge

This black umber panel hinge connects 2 panels of equal or unequal heights at any angle up to 180°. It has an enameled surface.
Part #A0270

Finished End

This cover finishes the exposed end of a panel or supports a transaction surface at the end of a panel run. It has an enameled surface. Part # A0250

Finished End, Change of Height, Panel/Panel

This cover finishes the exposed end of a panel that joins panels of unequal heights. It is 32" long but can be field cut to the appropriate length.
Part # A0251

Stacking 2-Way 90° Connector

This connector attaches to the top of an existing 2-way 90° connector and extends the height of the connector used with a stacking panel(s). It has an enameled or fabric surface. Attachment hardware is included. Part#A1226

Stacking 2-Way 120° Connector

This connector attaches to the top of an existing 2-way 120° connector and extends the height of the connector used with a stacking panel(s). It has an enameled or fabric surface. Attachment hardware is included. Part# A1227

Stacking 3-Way 90° Connector

This connector attaches to the top of an existing 3-way 90° connector and extends the height of the connector used with a stacking panel(s). It has an enameled or fabric surface. Attachment hardware is included. Part#A1236

Stacking 3-Way 120° Connector

This connector attaches to the top of an existing 3-way 120° connector and extends the height of the connector used with a stacking panel(s). It has an enameled surface. Attachment hardware is included. Part# A1227

Stacking 4-Way 120° Connector

This connector attaches to the top of an existing 4-way 90° connector and extends the height of the connector used with stacking panel(s). Attachment hardware is included.
Part# A1246

Stacking T Connector

This T-shaped connector joins 2 stacking panels in a straight line.
Part#A1214

Stacking L-Connector, Change of Height or End of Run

This L-shaped connector joins a stacking panel on which it sits when the adjacent panel is in a straight line and its height is equal to or lower than the panel. It also connects a stacking panel to the panel on which it sits at the end of a run.
Part# A1218

Stacking Panel-to-Connector Attachment kit

This kit connects a stacking panel to a spacer or 2-way, 3-way, or 4-way 90° connector. The connector height must be equal to or higher than the combined height of the panel and stacking panel(s).
Part#A1293

Stacking Finish End

This cover finishes the exposed end of a panel/stacking panel(s). It has a cable management end cover and an enameled surface.
Part# A1256

Stacking Finished End, Change of Height

This cover finishes the exposed end of a panel/stacking panel or stacking panel connected to a panel or stacking panel of unequal height. The finished end has an enameled surface.
Part#A1257

2-Way 90° Connector with Wood Top Cap

This connector joins 2 panels of equal or unequal heights at a 90° angle. It has an enameled or fabric surface, a veneer top cap, and a cable management side cover. The veneer top cap adds 1" to the connector height.
Part# NP259

Spacer with Wood Top Cap

This spacer joins 2 panels of equal or unequal heights in a straight line and also compensates for dimensional gain in a panel run. It has enameled or fabric surface, a veneer top cap, and 2 cable management side covers. The veneer top cap adds 1" to the spacer height. Part# NP260

More Panel Parts- Panels | Connector/Ends | Power Entry

Categories

Metro Wire Shelving

By Manufacturer

Herman Miller® Action Office® Parts